您的位置: 首页 > 技术文章 > 磁性分离器厂家提供结构原理与使用安装中英文说明

磁性分离器厂家提供结构原理与使用安装中英文说明

更新时间:2015-01-28浏览量:2087

 一、磁性分离器结构原理

 
    磁性分离器由减速器和磁辊两大部分组成。减速器是通过链条带动磁辊转动,磁辊内装有*强力磁铁,冷却液中的铁屑吸附在磁鼓套表面,压辊将铁屑中的冷却液挤压出去,并流回液箱,铁屑被刮板刮掉后排入污物箱。  
 
    STRUCTION:The magnetic separator is consisted of reduction and magnetic roll. Reductions drive the magnetic roll by chain. The magnetic roll with many pieces of permanent magnetic can attract iron particle from cool liquid and make iron particles on the surface of it. Cooling liquid contained in iron fillings is then extruded out by press of magnetic roll and return to liquid tank . Iron filling scraped by rubber fall into dirt box.
 
二、磁性分离器使用安装  
 
1、磁性分离器的流量应根据机床水泵流量选定,两者应相一致。
 
2、运行中,磁辊的转向应按磁性分离器厂家说明书箭头所示。
 
3、胶辊的松紧调整适当,用来挤压铁屑中的水分。 
 
4、刮板的位置也可调整,不要与磁辊靠的太紧,用来刮除磁辊上的铁屑。 
 
OPERATION AND INSTALLTION:
1、The flow capacity of the magnetic separator should be selected according to the flow capacity of pump, the both are asked to be same. 
2、In operation, the direction of the magnetic roll's rotation should accord with arrow .                                         3、Tightness of rubber pressing magnetic roll is adjustable to press water contained in iron filling.  
4、The position of scraping board is adjustable not too close to magnetic roll, to scrape iron filling on the surface of magnetic roll. 

 

Contact Us
  • QQ:1569835740
  • 邮箱:15226711227@163.com
  • 传真:0317-6363197
  • 地址:河北省盐山县西崔凡工业园588号

扫一扫  微信咨询

©2024 盐山县东慧机床附件制造厂 版权所有    备案号:冀ICP备15000888号-1    技术支持:机床商务网    Sitemap.xml    总访问量:150793    管理登陆